Synthesis,Hirshfeld surface analysis,luminescence and thermal properties of three first-row transition metal complexes containing 4′-hydroxy-2,2′:6′,2″-terpyridine: Application for preparation of nano metal oxides

A series of new mono- and bis-terpyridine complexes [Mn(tpyOH)Cl₂] ( 1 ), [Ni(tpyOH)₂](PF₆)₂ ( 2 ) and [Zn(tpyO)(η¹-OCOCH₃)(H₂O)]⋅3H₂O ( 4 ) containing 4′-hydroxy-2,2′:6′,2″-terpyridine (tpyOH) were synthesized and structurally characterized using elemental analysis, infrared spectroscopy and single-crystal X-ray diffraction. The reaction of MnCl₂ with tpyOH in a mixture of methanol and CH₂Cl₂ resulted in the formation of 1 . The X-ray crystal structure of 1 reveals that Mn(II) is penta-coordinated by three nitrogen atoms from tpyOH and two Cl⁻ in a slightly distorted trigonal bipyramidal geometry. Complex 2 was also prepared by the reaction of nickel(II) chloride with tpyOH in a methanolic medium in the presence of NH₄PF₆. Notably, the complex [Ni(tpyOH)(tpyO)]PF₆ ( 3 ), obtained during the crystallization of 2 from dichloromethane, was characterized using X-ray crystallography which shows that six nitrogen atoms from terpyridine ligands occupy the coordination sites around the Ni(II) centre in a distorted octahedral geometry with four longer bonds and two shorter Ni N bonds. The reaction of zinc(II) acetate with tpyOH in a mixture of methanol and CH₂Cl₂ led to the formation of 4 . The crystal structure of 4 reveals the formation of penta-coordinated Zn(II) complex containing three nitrogen atoms from tpyO, a monodentate acetate ligand and one coordinated water molecule. Hirshfeld surface analyses and two-dimensional fingerprint plots show that the main interactions are O…H/H…O contacts in 1 , 3 and 4 . The thermal decomposition reactions of 1 , 2 and 4 were studied using thermogravimetric analysis in detail due to their different structures. The solution luminescence features of 1 , 2 and 4 include high-energy intense π → π* intraligand and low-energy metal-to-ligand charge transfer transitions at room temperature. The calcination of the coordination complexes led to the formation of corresponding nano metal oxides. The products were structurally characterized using infrared spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy. The average particle size using Scherrer's equation was calculated to be below 50 nm.     

苗族服饰色彩体系构建研究

色彩是民族服饰的核心要素，也是民族文化元素的重要组成部分，构建一套兼具科学性与实用性的色彩体系极具挑战性。在传统色彩地理学方法基础上，通过提取主题色和改进的关联规则挖掘方法，获取色彩数据、寻找色彩规则，并对其进行自然色彩体系（NCS）编谱分析，构建了一套苗族服饰色彩体系（Miao’s costume color system,MCCS）。该体系有助于进一步挖掘苗族服饰的配色规律，实现对苗族服饰色彩的数字化保护，为民族服饰色彩传承机理的探索与研究提供新的思路。     

Characteristic material parameters of CIGS solar cell related with device performance

CIGS solar cells with power conversion efficiency (PCE) in the range of 1.82%–12.30% were obtained by using two-step process, and were further analyzed through various measurement techniques. Material parameters showed diverse values and some trends depending on the device performance. The lower performance device showed small integrated PL intensity, short minority life time, larger defect density and lower activation energy, whereas the higher performance device showed opposite values. We investigated relationship between material parameters and PCE of solar cells, and found that some physical parameters such as integrated PL intensity, minority life time, defect density, and difference between band gap and activation energy (E_g-E_a), which all reflect defect states in bulk and at pn interface, are strongly related with PCE and would be used as a good indicator to evaluate device performance quickly.     

A modified model for isothermal homogeneous and heterogeneous reactions in the boundary-layer flow of a nanofluid

The homogeneous and heterogeneous reactions in the boundary-layer of a flat surface are considered. The autocatalysts are assumed to be of regular sizes, while the solution is a dilute nanofluid. The heat release due to the chemical reactions is taken into account. The Buongiorno's model is used to describe the behaviors of this reaction system. This configuration makes the current model be different from all previous publications. Multiple solutions are given numerically to the rescaled nonlinear system, whose stability is verified. The results show that the strength coefficients of the homogeneous and heterogeneous reactions are key factors to cause the appearance of the multiple solutions in the distribution of the chemical reactions. Nanofluids enhance the diffusion of heat and help maintain the stability of chemical reactions.     

Mass spectrometry imaging of latent fingerprints using titanium oxide development powder as an existing matrix

Recent research has focused on increasing the evidentiary value of latent fingerprints through chemical analysis. Although researchers have optimized the use of organic and metal matrices for matrix‐assisted laser desorption/ionization‐mass spectrometry imaging (MALDI‐MSI) of latent fingerprints, the use of development powders as matrices has not been fully investigated. Carbon forensic powder (CFP), a common nonporous development technique, was shown to be an efficient one‐step matrix; however, a high‐resolution mass spectrometer was required in the low mass range due to carbon clusters. Titanium oxide (TiO₂) is another commonly used development powder, especially for dark nonporous surfaces. Here, forensic TiO₂ powder is utilized as a single‐step development and matrix technique for chemical imaging of latent fingerprints without the requirement of a high‐resolution mass spectrometer. All studied compounds were successfully detected when TiO₂ was used as the matrix in positive mode, although, generally, the overall ion signals were lower than the previously studied CFP. TiO₂ provided quality mass spectrometry (MS) images of endogenous and exogenous latent fingerprint compounds. The subsequent addition of traditional matrices on top of the TiO₂ powder was ineffective for universal detection of latent fingerprint compounds. Forensic TiO₂ development powder works as an efficient single‐step development and matrix technique for MALDI‐MSI analysis of latent fingerprints in positive mode and does not require a high‐resolution mass spectrometer for analysis.     

Effect of nitrogen plasma treatment on the crystallinity and self‐bonding of polyetheretherketone (PEEK) for biomedical applications

Polyetheretherketone (PEEK) is a thermoplastic material with outstanding properties and high potential for biomedical applications, including hermetic encapsulation of active implantable devices. Different biomedical grade PEEK films with initial degree of crystallinity ranging from 8% to 32% (with or without mineral filling) were inspected. PEEK surfaces were treated with nitrogen RF plasma and the effects on materials crystallinity and self‐bonding were evaluated. In particular, the relationship between auto‐adhesive properties and crystalline content of PEEK before and after plasma treatment was examined. PEEK samples showed different bonding strength depending on their degree of crystallinity, with higher self‐bonding performance of mineral‐filled semi‐crystalline films. XRD did not show any modification of the PEEK microstructure as a result of plasma treatment, excluding a significant influence of crystallinity on the self‐bonding mechanisms. Nevertheless, plasma surface treatment successfully improved the self‐bonding strength of all the PEEK films tested, with larger increase in the case of semi‐crystalline unfilled materials. This could be interpreted to the increase in chain mobility that led to interfacial interpenetration of the amorphous phase.     

连续梁在周期荷载下的动力稳定性简化分析方法

对于一般任意支撑的连续梁结构动力稳定性问题，已有的计算方法求解过程都很复杂，给工程设计带来极大的不便．本文提出了一个简化的分析方法，利用现有的商业软件，只需求得连续梁的自然频率及静力屈曲（失稳）荷载，就可容易得到结构的动力失稳区域，当考虑结构阻尼对不稳定区域的影响时，可将阻尼矩阵表达为Rayleigh阻尼的形式．研究结果表明：采用本文计算方法与已有的理论计算方法得到的连续梁主参数共振的不稳定边界非常吻合，而本文计算方法更为简单，计算结果可靠，计算精度高，可满足工程设计的需要．     

正负双向脉冲式爆炸及其诱导的簇发振荡

簇发振荡普遍存在.探索通向簇发振荡的可能路径是簇发研究的热点问题之一."脉冲式爆炸(pulsed-shaped explosion,PSE)"是一种最近被报道的可以诱发簇发振荡的新机制,其特征为平衡点和极限环表现出了与参数变化相关的脉冲式急剧量变.PSE会导致系统轨线急剧跃迁,从而诱发典型的簇发振荡.然而,目前报道的PSE中仅含有"单向的尖峰",未发现"双向的尖峰",且由其诱发的簇发振荡仅含单向的振荡簇.本文以多频激励Rayleigh系统为例,旨在揭示PSE的不同表现形式以及与此相关的簇发动力学.利用频率转换快慢分析法得到了Rayleigh系统的快子系统和慢变量.针对快子系统的分析表明,PSE表现出了较为复杂的动力学特性,其特征是PSE包含了正负双向两个不同的尖峰,此即所谓的正负双向PSE.其急剧量变行为,导致了系统轨线在单个振荡周期内出现正向和负向的多次跃迁,由此得到了由正负双向PSE所诱发的簇发振荡.根据吸引子类型分别揭示了点--点型和环--环型两类簇发振荡模式的产生机制.本文的研究给出了PSE的不同表现形式,丰富了多时间尺度下的簇发振荡的诱发机制.      

等热流密度加热垂直下降液膜的研究

利用等热流密度加热条件下降膜流动的三维模型方程进行线性稳定性分析和数值模拟。线性稳定性分析表明，模型方程在小到中等Reynolds数下都适用，并且流向不稳定性增长率随着Reynolds数和Marangoni数增加而增加，展向不稳定性增长率则随着Marangoni数增加而增加，随着Reynolds数增加而减小，流向和展向对扰动波数都存在一个不稳定区间。三维数值模拟表明，在等热流密度加热条件下，液膜在随机扰动的情况下最终会形成带孤立波的三维溪流状结构，液膜与气体的换热也因溪流状结构的出现而加强；在随机扰动的基础上引入占优势地位的展向最不稳定扰动会使得换热增强，液膜会提前破裂；在随机扰动的基础上引入占优势地位的流向最不稳定扰动时，液膜的换热会增强，但不会提前破裂；在随机扰动的基础上同时引入占优势地位的流向和展向最不稳定扰动时，换热会加强且液膜会提前破裂。